Wolfspeed recommends a 2-layer PCB with a thermal via array under the device to dissipate heat. A minimum of 10 thermal vias with a diameter of 0.3 mm, spaced 1.2 mm apart, is recommended. Additionally, a thermal pad with a minimum size of 10 mm x 10 mm is suggested.
To ensure reliable operation, maintain a junction temperature (Tj) below 150°C. Monitor the device's temperature using a thermocouple or thermal imaging camera. Implement a thermal management system, such as a heat sink or fan, to keep the device within the recommended temperature range.
Wolfspeed recommends a gate drive circuit with a voltage swing of 15 V to 20 V, a current capability of 1 A to 2 A, and a rise/fall time of 10 ns to 20 ns. A gate resistor of 10 Ω to 20 Ω is also recommended to dampen oscillations.
Handle the device with ESD-protective equipment, such as wrist straps and mats. Ensure the PCB is designed with ESD protection in mind, including the use of ESD diodes and resistors. Store the device in an ESD-protective package when not in use.
The C3M0120100K is designed for high-frequency operation, with a recommended operating frequency range of 100 kHz to 1 MHz. However, the device can operate up to 5 MHz with reduced performance and efficiency.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
C3M0120100K Overview
Use the download button to access the C3M0120100K schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like C3M01,
or try a keyword search, such as Power Field-Effect Transistors
Suggested Parts
If you searched for C3M0120100K, you might also be interested in these parts:
