Part Image

CAT34C02VP2IGT4A - onsemi

Description: EEPROM 2KB I2C SER EEPROM SPD

Download CAT34C02VP2IGT4A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
CAT34C02VP2IGT4A - onsemi PCB footprint - Small Outline No-lead - Small Outline No-lead - TDFN8, 2x3, 0.5P CASE 511AK ISSUE B
click to zoom
3D Models
CAT34C02VP2IGT4A - onsemi  - 3D model - Small Outline No-lead - TDFN8, 2x3, 0.5P CASE 511AK ISSUE B
click to zoom

CAT34C02VP2IGT4A Details

  • Manufacturer Part Number:

    CAT34C02VP2IGT4A

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TDFN8, 2x3

  • Package Description:

    TDFN-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    511AK

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    onsemi

  • YTEOL:

    5

  • Additional Feature:

    100 YEAR DATA RETENTION

  • Clock Frequency-Max (fCLK):

    0.4 MHz

  • Data Retention Time-Min:

    100

  • Endurance:

    1000000 Write/Erase Cycles

  • I2C Control Byte:

    1010DDDR

  • JESD-30 Code:

    R-PDSO-N8

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Memory Density:

    256 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    16

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Ports:

    1

  • Number of Terminals:

    8

  • Number of Words:

    16 words

  • Number of Words Code:

    16

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    16X16

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.11,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Page Size:

    16 words

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Ready/Busy:

    YES

  • Reverse Pinout:

    NO

  • Seated Height-Max:

    0.8 mm

  • Serial Bus Type:

    I2C

  • Standby Current-Max:

    0.000001 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.7 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    2 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    HARDWARE/SOFTWARE

CAT34C02VP2IGT4A Frequently Asked Questions (FAQs)

  • A good PCB layout for the CAT34C02VP2IGT4A involves keeping the input and output traces separate, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The CAT34C02VP2IGT4A requires a single 3.3V power supply. It's recommended to use a low-dropout linear regulator or a switching regulator with a low noise output to power the device. Power sequencing is not critical, but it's recommended to power up the device after the input voltage has stabilized.
  • The maximum allowed capacitance on the output of the CAT34C02VP2IGT4A is 10uF. Exceeding this value may affect the stability of the output voltage.
  • The output voltage of the CAT34C02VP2IGT4A can be calculated using the following formula: Vout = (R1/R2) * (Vref - Vfb), where R1 and R2 are the resistors in the feedback network, Vref is the internal reference voltage, and Vfb is the feedback voltage.
  • The thermal derating of the CAT34C02VP2IGT4A is 12.5mW/°C above 25°C. This means that the device's power dissipation must be reduced as the temperature increases to prevent overheating and ensure reliable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

CAT34C02VP2IGT4A Overview

Use the download button to access the CAT34C02VP2IGT4A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CAT34, or try a keyword search, such as EEPROMs

Parts related to CAT34C02VP2IGT4A

Showing 0 results

CAT34C02VP2IGT4A Alternates

Showing results

Image Part Number Model
Part Image CAT34C02VP2I-GT4A onsemi

EEPROM, 16X16, Serial, CMOS, PDSO8

Part Image CAT34C02HU3I-GT4 Catalyst Semiconductor

EEPROM, 256X8, Serial, CMOS, PDSO8

Part Image CAT34C02VP2I-GT4 Catalyst Semiconductor

EEPROM, 256X8, Serial, CMOS, PDSO8

Part Image CAT34C02HU3I-GT4 onsemi

EEPROM, 16X16, Serial, CMOS, PDSO8

Part Image CAT34C02VP2IT4 onsemi

EEPROM, 256X8, Serial, CMOS, PDSO8

For a full list of alternate parts for CAT34C02VP2IGT4A, check out Findchips.com