The recommended PCB layout for the CDRH8D28NP-470NC is to use a symmetrical layout with the inductor centered on the PCB, and to keep the copper traces as short and wide as possible to minimize parasitic inductance and resistance.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the risk of overheating the component, and avoid applying excessive force that could damage the inductor.
The maximum operating temperature range for the CDRH8D28NP-470NC is -40°C to +125°C, with a derating of 1.25% per degree Celsius above 80°C.
To prevent damage, store the inductor in a dry, clean environment, away from direct sunlight and moisture. During shipping, use anti-static packaging and avoid exposing the inductor to mechanical stress or vibration.
The recommended reflow soldering profile for the CDRH8D28NP-470NC is a peak temperature of 240°C to 250°C, with a dwell time of 30 seconds to 60 seconds, and a ramp-up rate of 1°C to 3°C per second.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CDRH8D28NP-470NC Overview
Use the download button to access the CDRH8D28NP-470NC 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH8,
or try a keyword search, such as Fixed Inductors
