A good PCB layout for the CDSOT23-T24CAN involves keeping the input and output traces short and separate, using a ground plane, and placing the device close to the CAN transceiver. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure EMC, use a shielded cable for the CAN bus, keep the device away from high-frequency sources, and use a common-mode choke or ferrite bead to filter out electromagnetic interference (EMI).
The maximum cable length supported by the CDSOT23-T24CAN is 40 meters, assuming a transmission rate of 1 Mbps and a cable with a characteristic impedance of 120 ohms.
Yes, the CDSOT23-T24CAN can be used in non-automotive applications, such as industrial control systems, medical devices, and building automation systems, as long as the operating conditions and specifications are met.
To troubleshoot issues with the CDSOT23-T24CAN, check the power supply voltage, verify the CAN bus termination, and use a logic analyzer or oscilloscope to monitor the CAN bus signals. Consult the datasheet and application notes for more information.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDSOT23-T24CAN Overview
Use the download button to access the CDSOT23-T24CAN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDSOT,
or try a keyword search, such as Transient Suppressors
Suggested Parts
If you searched for CDSOT23-T24CAN, you might also be interested in these parts:
