CMR0515S3C - Murata Electronics

CMR0515S3C Frequently Asked Questions (FAQs)

• What is the recommended land pattern for the CMR0515S3C?
  The recommended land pattern for the CMR0515S3C is a rectangular pad with a size of 1.2mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape.
• How do I handle the CMR0515S3C during reflow soldering?
  During reflow soldering, the CMR0515S3C should be placed on a flat surface, and the peak reflow temperature should not exceed 260°C. The component should be soldered within 10 seconds of reaching the peak temperature.
• What is the maximum operating temperature range for the CMR0515S3C?
  The CMR0515S3C can operate within a temperature range of -20°C to 80°C, but the resonant frequency may vary slightly with temperature.
• How do I ensure the CMR0515S3C is properly cleaned and dried after washing?
  After washing, the CMR0515S3C should be dried using a clean, dry air blow or a nitrogen blow to prevent water spots. The component should not be exposed to ultrasonic cleaning or high-pressure washing.
• What is the recommended storage condition for the CMR0515S3C?
  The CMR0515S3C should be stored in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -20°C to 40°C, and the humidity should be below 70%.