The recommended PCB layout involves placing the CMS-2402A near the edge of the board to ensure good airflow. A thermal pad or heat sink is recommended to dissipate heat. A minimum of 2oz copper thickness and a 1-inch diameter thermal pad are suggested. Additionally, ensure that the PCB layout allows for minimal thermal resistance between the device and the heat sink.
The CMS-2402A has a wide input voltage range (3.3V to 5.5V). Select an input voltage that matches your system's voltage rail. For current selection, consider the maximum output current required by your load and add a 10-20% margin for safety. The CMS-2402A can deliver up to 2A of output current.
A 10uF to 22uF ceramic capacitor (X5R or X7R dielectric) is recommended for output filtering. This value provides a good balance between stability and transient response. Ensure the capacitor is placed close to the output pin and has a low ESR (Equivalent Series Resistance) for optimal performance.
The CMS-2402A has an enable pin (EN) that can be used to control power-up and power-down. Connect the EN pin to a logic signal (e.g., from a microcontroller) to enable or disable the regulator. Ensure that the input voltage is stable and within the recommended range before enabling the regulator. During power-down, ensure that the input voltage is removed before disabling the regulator.
The CMS-2402A has built-in thermal shutdown and overcurrent protection features. Thermal shutdown occurs when the junction temperature exceeds 150°C, and the regulator will automatically shut down to prevent damage. Overcurrent protection limits the output current to 3.5A (typical) to prevent damage from excessive current. Both features are designed to protect the regulator and the system from damage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CMS-2402A Overview
Use the download button to access the CMS-2402A 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CMS-2,
or try a keyword search, such as Slide Switches
