The recommended wiring method is to use a shielded cable with a twisted pair for the analog output signal to minimize electromagnetic interference (EMI).
Calibration is not required for the CR18-8DN as it is a pre-calibrated device. However, it is recommended to perform a zero-point adjustment after installation to ensure accurate measurements.
The response time of the CR18-8DN is typically around 100 ms, but this can vary depending on the specific application and environmental conditions.
The CR18-8DN is not certified for use in hazardous locations. It is recommended to use a different model or consult with Autonics Corporation for a customized solution.
The maximum cable length for the CR18-8DN is 100 meters. However, it is recommended to use a shorter cable length to minimize signal attenuation and ensure accurate measurements.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CR18-8DN Overview
Use the download button to access the CR18-8DN 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CR18-,
or try a keyword search, such as Proximity Sensors
