The recommended land pattern for the CRL0805-FW-2R20ELF is a rectangular pad with a size of 1.2 mm x 0.8 mm, with a non-solder mask defined (NSMD) pad shape. This can be found in the Bourns application note 'Surface Mount Resistor Land Patterns'.
The CRL0805-FW-2R20ELF has a power rating of 0.25 W, and a thermal resistance of 350°C/W. To handle thermal considerations, ensure that the resistor is placed on a PCB with a sufficient thermal dissipation path, and consider using thermal vias or thermal pads to dissipate heat. Also, avoid placing the resistor near heat sources or in areas with high thermal density.
The CRL0805-FW-2R20ELF is a general-purpose chip resistor, and its frequency response is not optimized for high-frequency applications. While it can be used up to a few hundred MHz, it may not be the best choice for high-frequency circuits. For high-frequency applications, consider using a resistor with a lower inductance and a more controlled impedance profile.
The CRL0805-FW-2R20ELF has a maximum operating temperature of 150°C. While it can tolerate short-term excursions up to 200°C, prolonged exposure to high temperatures can affect its reliability and lifespan. If you need a resistor for high-temperature applications, consider using a part with a higher temperature rating, such as the CRL0805-FW-2R20ELF-HT, which is rated for up to 200°C.
The CRL0805-FW-2R20ELF is a moisture-sensitive device, and exposure to high humidity can affect its reliability. To ensure reliability in humid environments, consider using a conformal coating or potting compound to protect the resistor from moisture. Also, ensure that the PCB is designed with a sufficient moisture barrier, and that the resistor is not exposed to water or condensation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CRL0805-FW-2R20ELF Overview
Use the download button to access the CRL0805-FW-2R20ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRL08,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
