The recommended land pattern for the CRL2512-JW-R220ELF is a rectangular pad with a size of 2.5 mm x 1.3 mm, with a non-solder mask defined (NSMD) pad shape.
The CRL2512-JW-R220ELF should be stored in a dry, cool place, away from direct sunlight and moisture. It should be handled with care to avoid mechanical stress, and electrostatic discharge (ESD) precautions should be taken.
The thermal resistance of the CRL2512-JW-R220ELF is not explicitly stated in the datasheet, but it can be estimated to be around 20-30°C/W, depending on the PCB design and layout.
Yes, the CRL2512-JW-R220ELF is suitable for high-frequency applications up to several hundred MHz, but the inductor's performance may degrade at very high frequencies due to skin effect and other parasitic effects.
The correct inductor value depends on the specific application requirements, such as the operating frequency, current, and voltage. A good starting point is to use the inductor's impedance vs. frequency curve to select an inductor value that meets the required impedance at the operating frequency.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CRL2512-JW-R220ELF Overview
Use the download button to access the CRL2512-JW-R220ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRL25,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
