The recommended PCB footprint for the CRS2512AJW-102ELF is a rectangular pad with dimensions of 2.5mm x 1.3mm, with a 0.5mm radius corner. The pad should be centered on the component and have a 0.2mm clearance around the perimeter.
The CRS2512AJW-102ELF has a maximum operating temperature of 125°C. To ensure reliable operation, it's recommended to keep the component temperature below 100°C. This can be achieved by providing adequate heat sinking, using thermal vias, and optimizing the PCB layout to minimize thermal resistance.
The recommended soldering profile for the CRS2512AJW-102ELF is a peak temperature of 260°C, with a dwell time of 10-30 seconds above 220°C. The component should be soldered using a no-clean or water-soluble flux, and the soldering process should be completed within 3 minutes.
After soldering, the CRS2512AJW-102ELF should be cleaned with a mild solvent, such as isopropyl alcohol or a commercial PCB cleaner, to remove any flux residue. The component should then be dried with a soft brush or air blower to prevent moisture accumulation.
The CRS2512AJW-102ELF is a sensitive component and requires proper ESD precautions to prevent damage. Handlers should wear an ESD wrist strap or use an ESD mat, and the component should be stored in an ESD-safe environment. Avoid touching the component's pins or leads, and use ESD-safe packaging materials.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CRS2512AJW-102ELF Overview
Use the download button to access the CRS2512AJW-102ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRS25,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
