The recommended PCB layout and spacing for the CS11028.0F260 can be found in the CIT Relay & Switch application note AN-101, which provides guidelines for proper PCB design and layout to ensure reliable operation and minimize electromagnetic interference (EMI).
To ensure proper driving and control of the CS11028.0F260, it is recommended to use a suitable driver circuit that can provide the required voltage and current to the relay coil. The driver circuit should also include protection components such as diodes and resistors to prevent back-EMF and voltage spikes.
The maximum switching frequency of the CS11028.0F260 is not explicitly stated in the datasheet, but it is typically limited by the relay's mechanical switching time and the driver circuit's capabilities. As a general guideline, the relay can be switched at frequencies up to 10 Hz, but this may vary depending on the specific application and operating conditions.
The CS11028.0F260 relay requires a coil voltage of 5V and a coil current of 30mA. To handle these requirements, it is recommended to use a voltage regulator and a current-limiting resistor in the driver circuit to ensure the relay coil is properly powered and protected from overvoltage and overcurrent conditions.
The CS11028.0F260 relay is designed to operate in a temperature range of -40°C to 85°C and a humidity range of 40% to 90% RH. It is also recommended to operate the relay in a clean and dry environment, away from exposure to moisture, dust, and other contaminants that may affect its performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CS11028.0F260 Overview
Use the download button to access the CS11028.0F260 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CS110,
or try a keyword search, such as Keypad Switches
