Cal Test Electronics recommends a minimum of 0.1 inches (2.54 mm) spacing between the CT3151-5 and other components on the PCB to minimize electromagnetic interference. A ground plane underneath the device is also recommended to reduce noise and improve performance.
To ensure accurate current measurement, it's essential to follow proper installation and wiring guidelines. Make sure the CT3151-5 is installed in the correct orientation, and the primary conductor is centered within the aperture. Also, ensure the burden resistor is correctly sized and connected to the output terminals.
The CT3151-5 is rated for operation from -40°C to +85°C. However, it's essential to note that the accuracy and performance of the device may degrade at extreme temperatures. It's recommended to operate the device within the specified temperature range for optimal performance.
Yes, the CT3151-5 can be used for both AC and DC current measurement. However, it's essential to note that the device is optimized for AC current measurement, and DC current measurement may require additional circuitry and calibration.
Cal Test Electronics recommends calibrating the CT3151-5 using a precision current source and a high-accuracy multimeter. The calibration procedure involves applying a known current to the primary conductor and measuring the output voltage across the burden resistor. The ratio of the output voltage to the primary current is then used to determine the calibration factor.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CT3151-5 Overview
Use the download button to access the CT3151-5 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CT315,
or try a keyword search, such as Other Interconnects
