Description:Board Mount Current Sensors XtremeSense TMR 1MHz Bandwidth Contactless Current Sensor, <1% Total Error 8-lead TSSOP (6 mT Bipolar; VDD = 5.0 V; Up to +125C)
Allegro recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a separate layer for the power supply. Keep the sense lines as short as possible and away from noise sources. Use a common mode filter or ferrite bead to reduce EMI.
Use a high-precision resistor (e.g., 1% or better) for the sense resistor, and ensure it is properly soldered and connected. Also, calibrate the device according to the datasheet's calibration procedure to minimize offset and gain errors.
Although the datasheet specifies a maximum VCC of 5.5V, it's recommended to keep VCC below 5V to ensure reliable operation and prevent damage to the device.
The CT452-H06MRTS08 is rated for operation up to 150°C, but it's essential to consider the device's power dissipation and thermal management in your design. Ensure proper heat sinking and follow Allegro's thermal design guidelines.
Use proper shielding, grounding, and filtering techniques to minimize EMI. Ensure the device is placed away from noise sources, and use a common mode filter or ferrite bead to reduce EMI. Follow Allegro's EMI/EMC design guidelines and relevant industry standards.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CT452-H06MRTS08 Overview
Use the download button to access the CT452-H06MRTS08 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CT452,
or try a keyword search, such as Other Sensors/Transducers
