The recommended operating voltage range for CY15B104QN-50LPXI is 2.7V to 3.6V.
It is recommended to follow a controlled power-up and power-down sequence to prevent latch-up and ensure proper device operation. A slow ramp-up of the power supply voltage (VCC) is recommended, and the device should be powered up in the following sequence: VCC, then VIO, then other input signals.
The maximum clock frequency supported by CY15B104QN-50LPXI is 104 MHz.
To ensure data retention during power-down, the VCC power supply voltage should be reduced to 0V or a voltage level below the data retention voltage (VDR) specified in the datasheet. Additionally, the device should be in a standby or sleep mode before power-down to minimize power consumption.
The WP (Write Protect) pin is used to prevent accidental writes to the device. When the WP pin is tied to VCC, the device is in a write-protected state, and any write attempts will be ignored. When the WP pin is tied to GND, the device is in a normal operating state, and writes are allowed.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CY15B104QN-50LPXI Overview
Use the download button to access the CY15B104QN-50LPXI 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CY15B,
or try a keyword search, such as FRAMs
