The recommended crystal oscillator frequency for the CY8C4126LTI-M445 is 24 MHz or 32 kHz, depending on the application requirements.
The GPIO pins can be configured using the Pin Configuration Register (PCR) and the Analog Mux Register (AMUX). Refer to the device's TRM (Technical Reference Manual) for detailed information.
The maximum current that can be sourced or sunk by the GPIO pins is 4 mA, but this can be increased to 8 mA by using the High-Current Pad Driver (HCPD) feature.
The CY8C4126LTI-M445 has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WDT_CTRL). The watchdog timer can be set to reset the device or generate an interrupt if the timer expires.
The power consumption of the CY8C4126LTI-M445 varies depending on the operating mode. In active mode, the current consumption is around 2-3 mA/MHz, while in sleep mode it is around 1-2 μA. Refer to the device's datasheet for detailed power consumption information.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CY8C4126LTI-M445 Overview
Use the download button to access the CY8C4126LTI-M445 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CY8C4,
or try a keyword search, such as Other uPs/uCs/Peripheral ICs