The recommended crystal oscillator frequency for the CY8C6244LQI-S4D92 is 32.768 kHz. This frequency is used as the clock source for the internal real-time clock (RTC) and watchdog timer.
To configure the USB interface to operate in device mode, you need to set the USB_MODE register to 0x02 and configure the USB_DEVICE_CFG register to enable device mode. Additionally, you need to implement the necessary USB device firmware to handle USB requests and responses.
The maximum current consumption of the CY8C6244LQI-S4D92 in active mode is approximately 25 mA at 3.3V and 25°C, depending on the clock frequency and peripheral usage. However, this value can vary depending on the specific application and usage scenario.
To use the CapSense interface, you need to configure the CapSense registers to enable the capacitive sensing functionality. This includes setting the sensor pin configurations, scan modes, and sensitivity settings. You also need to implement the necessary firmware to process the CapSense data and detect touch events.
The maximum flash endurance of the CY8C6244LQI-S4D92 is 10,000 program/erase cycles. This means that the flash memory can be programmed and erased up to 10,000 times before its reliability is compromised.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CY8C6244LQI-S4D92 Overview
Use the download button to access the CY8C6244LQI-S4D92 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CY8C6,
or try a keyword search, such as Other uPs/uCs/Peripheral ICs
