The recommended crystal oscillator frequency for the CY8C624ALQI-S2D42 is 32.768 kHz. This frequency is used as the clock source for the internal real-time clock (RTC) and watchdog timer.
To configure the USB interface to operate in device mode, you need to set the USB_MODE register to 0x02 and configure the USB_DEVICE_CFG register to enable device mode. Additionally, you need to implement the necessary USB device firmware to handle USB requests and responses.
The maximum current consumption of the CY8C624ALQI-S2D42 in active mode is approximately 25 mA at 3.3V supply voltage and 24 MHz clock frequency. However, this value can vary depending on the specific application and usage of peripherals.
To use the CapSense interface, you need to configure the CapSense registers to enable the capacitive sensing functionality. You also need to implement the necessary firmware to scan the capacitive sensors, calculate the capacitance values, and detect touch events.
The VBACKUP pin is used to connect an external battery or supercapacitor to provide backup power to the microcontroller's internal registers and RAM during power-down or brownout conditions. To use the VBACKUP pin, you need to connect an external battery or supercapacitor to the pin and configure the VBACKUP register to enable the backup power feature.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
CY8C624ALQI-S2D42 Overview
Use the download button to access the CY8C624ALQI-S2D42 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CY8C6,
or try a keyword search, such as Other uPs/uCs/Peripheral ICs
