The recommended crystal oscillator frequency for the CY8C6347FMI-BLD53T is 32.768 kHz. This frequency is used as the clock source for the internal real-time clock (RTC) and watchdog timer.
The CY8C6347FMI-BLD53T has a USB 2.0 Full-Speed interface that can be configured using the USBFS component in the PSoC Creator IDE. The USB interface can be configured as a device, host, or OTG (on-the-go) device. The configuration is done through the USBFS component's API and requires setting up the USB clock, enabling the USB interface, and configuring the endpoints.
The maximum current that can be sourced or sunk by the GPIO pins on the CY8C6347FMI-BLD53T is 25 mA. However, it's recommended to limit the current to 10 mA or less to ensure reliable operation and to prevent overheating.
The CY8C6347FMI-BLD53T has a built-in bootloader that can be used to update the firmware over USB or I2C. The bootloader can be configured using the Bootloadable component in the PSoC Creator IDE. The bootloader code is stored in a separate flash segment and can be updated using the bootloader API.
The power consumption of the CY8C6347FMI-BLD53T varies depending on the operating mode. In active mode, the power consumption is around 20 mA at 3.3V. In sleep mode, the power consumption is around 10 μA at 3.3V. In hibernate mode, the power consumption is around 1 μA at 3.3V. The exact power consumption depends on the clock frequency, voltage, and other factors.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CY8C6347FMI-BLD53T Overview
Use the download button to access the CY8C6347FMI-BLD53T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CY8C6,
or try a keyword search, such as Other uPs/uCs/Peripheral ICs
