3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for D2201N45T
- Part Number D2201N45T
- Manufacturer Infineon
- Pin Count 999
- Last Modified Date Nov 26, 2024 12:23 PM UTC
- Pinout / Pin List Click Here (Member Only)
D2201N45T Details
-
Manufacturer Part Number:
D2201N45T
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
Country Of Origin:
Germany, Hungary
-
ECCN Code:
EAR99
-
HTS Code:
8541.10.00.80
-
Manufacturer:
Infineon Technologies AG
-
YTEOL:
5
-
Application:
GENERAL PURPOSE
-
Configuration:
SINGLE
-
Diode Element Material:
SILICON
D2201N45T Frequently Asked Questions (FAQs)
-
Infineon provides a recommended PCB layout for the D2201N45T in their application note AN2019-01. It suggests using a thermal pad with a minimum size of 10mm x 10mm, and placing it in the center of the device. Additionally, it recommends using multiple vias to connect the thermal pad to the heat sink or a copper plane on the PCB.
-
To ensure reliable operation at high temperatures, it's essential to follow the recommended thermal design guidelines, including using a suitable heat sink, ensuring good thermal interface material (TIM) between the device and heat sink, and keeping the junction temperature (Tj) below the maximum rated value of 150°C. Additionally, consider using a thermistor or temperature sensor to monitor the device temperature and implement over-temperature protection if necessary.
-
The maximum allowed voltage slew rate for the D2201N45T is not explicitly stated in the datasheet. However, as a general guideline, Infineon recommends limiting the voltage slew rate to 10V/μs or less to minimize electromagnetic interference (EMI) and ensure reliable operation.
-
Yes, the D2201N45T can be used in a parallel configuration to increase current handling. However, it's essential to ensure that the devices are properly matched, and the gate drive signals are synchronized to prevent uneven current sharing. Additionally, consider the increased thermal requirements and ensure that the heat sink and thermal design can handle the increased power dissipation.
-
The recommended gate drive voltage for the D2201N45T is between 10V and 15V, with a current capability of at least 2A. However, the actual gate drive requirements may vary depending on the specific application and switching frequency. It's essential to consult the datasheet and application notes for more detailed information on gate drive requirements.
Trust Checks
Trust Score Unavailable
D2201N45T Overview
Use the download button to access the D2201N45T 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like D2201,
or try a keyword search, such as Rectifier Diodes
