ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends using a reflow soldering process with a peak temperature of 260°C and a dwell time of 30 seconds. Ensure the PCB is clean and dry, and use a solder paste with a melting point of 217°C or higher.
Although the datasheet specifies a maximum voltage of 100V, ROHM recommends derating the voltage to 80V or lower to ensure long-term reliability and to prevent damage from voltage spikes.
ROHM recommends using ESD protection devices such as TVS diodes or ESD arrays on the input lines to protect the DA204UFHT106 from electrostatic discharge. Ensure the ESD protection devices are rated for the maximum voltage and current of the application.
Although the datasheet specifies an operating temperature range of -40°C to 150°C, ROHM recommends operating the DA204UFHT106 within a range of -20°C to 125°C for optimal performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DA204UFHT106 Overview
Use the download button to access the DA204UFHT106 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DA204,
or try a keyword search, such as Rectifier Diodes
