STANDARDS: IEC/EN 60320-1/C14, UL 94V-0; UL 498; CSA C22.2; VDE
Connector Type:
MAINS POWER CONNECTOR
Contact Finish Mating:
NOT SPECIFIED
Contact Gender:
MALE
Contact Material:
NOT SPECIFIED
Coupling Type:
SNAP
DIN Conformance:
NO
IEC Conformance:
YES
Insulator Material:
POLYETHYLENE
MIL Conformance:
NO
Mains Connector Rating:
4A, 125/250VAC
Mating Information:
MULTIPLE MATING PARTS AVAILABLE
Mounting Type:
PANEL
Option:
GENERAL PURPOSE
Termination Type:
QUICK CONNECT
Total Number of Contacts:
3
DA22.4321.11 Frequently Asked Questions (FAQs)
Schurter recommends a PCB layout with a minimum pad size of 2.5mm x 1.5mm and a spacing of 1.5mm between pads to ensure reliable soldering and to prevent thermal stress.
While the DA22.4321.11 has a rated operating temperature range of -40°C to 85°C, it's not recommended for high-temperature applications above 85°C. For such applications, consider using a fuse with a higher temperature rating, such as the DA22.4321.11-HT.
To select the correct fuse value, consider the maximum current rating of your circuit, the voltage rating, and the fault current rating. Consult the datasheet and Schurter's fuse selection guide for more information.
Yes, the DA22.4321.11 is compatible with lead-free soldering processes and meets the requirements of the RoHS directive.
The typical response time of the DA22.4321.11 is around 1-2 seconds for an overcurrent event, depending on the fault current and ambient temperature.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DA22.4321.11 Overview
Use the download button to access the DA22.4321.11 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DA22.,
or try a keyword search, such as Mains Power Connectors
