Description:DA9063 is a powerful system PMIC for single-, dual-, and quad-core application processors such as those based on the ARM Cortex-A9TM and Cortex-A15TM architectures.The DA9063 follows a scalable approach of output currents and rails to supply the entire system and is capable of delivering a total of up to 12 A from its six DC-DC buck converters. High efficiency is achieved over a wide load range by automatically selecting Pulse Frequency Modulation (PFM) or Pulse Width Modulation (PWM) modes. All bucks use i
Renesas provides a recommended PCB layout guide in their application note ANP039, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
The DA9063-A0HO2 has multiple low-power modes that can be configured through the I2C interface. Refer to the datasheet section 7.3 for details on the different low-power modes and the corresponding register settings. Additionally, Renesas provides a power management guide in their application note ANP041.
The maximum current rating for the DA9063-A0HO2's output stages is 1.5A per channel, with a total maximum current of 3A for all channels combined. However, it's essential to consider the thermal limitations and ensure proper heat sinking to prevent overheating.
While the DA9063-A0HO2 is designed to operate within the recommended input voltage range of 2.7V to 5.5V, it's possible to operate it with a different input voltage range. However, this may affect the device's performance, efficiency, and reliability. Consult with Renesas support or a qualified engineer to determine the feasibility and potential trade-offs of operating the device outside the recommended input voltage range.
To troubleshoot I2C interface issues with the DA9063-A0HO2, start by verifying the I2C bus voltage levels, clock frequency, and signal integrity. Use an oscilloscope or logic analyzer to capture the I2C bus signals and verify that they meet the I2C specification. Check the device's datasheet and application notes for specific guidelines on I2C interface configuration and troubleshooting.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DA9063-A0HO2 Overview
Use the download button to access the DA9063-A0HO2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DA906,
or try a keyword search, such as Power Management Circuits
