Signal Construct Gmbh recommends a 4-layer PCB with a dedicated ground plane and thermal vias to ensure efficient heat dissipation. A minimum of 1 oz copper thickness is recommended for the top and bottom layers. Additionally, a thermal pad with a minimum size of 10mm x 10mm is recommended for heat sink attachment.
To ensure EMC, Signal Construct Gmbh recommends using a shielded enclosure, keeping the DBI01302 at least 10mm away from the PCB edge, and using a common-mode choke on the input lines. Additionally, a 10nF capacitor should be placed between the input lines and the shield to reduce EMI.
The DBI01302 is rated for operation from -40°C to +85°C. However, Signal Construct Gmbh recommends derating the device by 1°C per 1000 feet above sea level to ensure reliable operation.
Yes, the DBI01302 is designed to withstand vibrations up to 10g RMS from 10Hz to 2000Hz. However, Signal Construct Gmbh recommends using a vibration-dampening material, such as a silicone-based adhesive, to secure the device to the PCB.
Signal Construct Gmbh recommends storing the DBI01302 in a dry, cool place (less than 30°C and 60% RH) away from direct sunlight. The device should be handled with anti-static wrist straps and stored in anti-static packaging to prevent ESD damage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DBI01302 Overview
Use the download button to access the DBI01302 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DBI01,
or try a keyword search, such as Visible LEDs
