3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for DC37-SR
- Part Number DC37-SR
- Manufacturer Adam Tech
- Pin Count 37
- Part Category Connector
- Last Modified Date Aug 9, 2023 10:05 AM UTC
- Pinout / Pin List Click Here (Member Only)
DC37-SR Details
-
Manufacturer Part Number:
DC37-SR
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
ECCN Code:
EAR99
-
HTS Code:
8536.69.40.30
-
Manufacturer:
Adam Technologies Inc
-
Body/Shell Style:
SOCKET
-
Connector Type:
D SUBMINIATURE CONNECTOR
-
DIN Conformance:
NO
-
IEC Conformance:
NO
-
MIL Conformance:
NO
DC37-SR Frequently Asked Questions (FAQs)
-
Adam Technologies recommends a 4-layer PCB with a solid ground plane and thermal vias to dissipate heat. A minimum of 2 oz copper thickness is recommended for the top and bottom layers. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a large copper area to ensure efficient heat dissipation.
-
The DC37-SR requires a dual power supply with a minimum of ±12V and a maximum of ±15V. The recommended biasing scheme is to connect the V+ pin to the positive power supply and the V- pin to the negative power supply. Additionally, a 10nF capacitor should be connected between the V+ and V- pins to filter out noise and ensure stable operation.
-
The DC37-SR is rated for operation from -40°C to +85°C. However, the device's performance may degrade above +70°C, and it's recommended to derate the output power by 1dB for every 10°C above +70°C to ensure reliable operation.
-
The DC37-SR is a sensitive device and requires proper ESD protection during handling and assembly. Adam Technologies recommends using an ESD wrist strap or mat, and storing the device in an anti-static bag or container. Additionally, the device's pins should be connected to a 1kΩ resistor and a 10nF capacitor to ground to prevent ESD damage.
-
Adam Technologies recommends a soldering profile with a peak temperature of 260°C and a dwell time of 10-15 seconds. The device should be soldered using a no-clean flux and a solder with a melting point of 180-190°C. It's also recommended to use a soldering iron with a temperature control to prevent overheating the device.
Trust Checks
Trust Score Unavailable
DC37-SR Overview
Use the download button to access the DC37-SR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DC37-,
or try a keyword search, such as D Type Connectors
