Vicor recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a thermal relief pattern on the top layer to ensure good thermal conductivity. A minimum of 2 oz copper thickness is recommended.
To ensure reliable start-up, Vicor recommends a soft-start circuit to limit the inrush current, and a minimum input capacitance of 10uF to ensure stable voltage regulation.
The maximum allowed input voltage ripple for the DCM module is 10% of the nominal input voltage, with a maximum deviation of ±5%.
Yes, the DCM module is rated for operation up to 100°C, but derating is required above 85°C. Consult the datasheet for specific derating guidelines.
The DCM module has a built-in voltage sense pin (VSENSE) that can be connected to a voltage monitoring circuit or a microcontroller for output voltage monitoring.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DCM3414V50M13C2C01 Overview
Use the download button to access the DCM3414V50M13C2C01 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DCM34,
or try a keyword search, such as Power Supply Modules
