HIGH RELIABILITY, BUILT IN BIAS RESISTOR RATIO IS 21.36
Case Connection:
COLLECTOR
Collector Current-Max (IC):
0.1 A
Collector-Emitter Voltage-Max:
50 V
Configuration:
SINGLE WITH BUILT-IN RESISTOR
DC Current Gain-Min (hFE):
180
JESD-30 Code:
R-PBCC-N3
JESD-609 Code:
e4
Moisture Sensitivity Level:
1
Number of Elements:
1
Number of Terminals:
3
Operating Temperature-Max:
150 °C
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
CHIP CARRIER
Peak Reflow Temperature (Cel):
260
Polarity/Channel Type:
NPN
Power Dissipation-Max (Abs):
0.25 W
Qualification Status:
Not Qualified
Surface Mount:
YES
Terminal Finish:
NICKEL PALLADIUM GOLD
Terminal Form:
NO LEAD
Terminal Position:
BOTTOM
Time@Peak Reflow Temperature-Max (s):
30
Transistor Element Material:
SILICON
Transition Frequency-Nom (fT):
250 MHz
DDTC123JLP-7 Frequently Asked Questions (FAQs)
The recommended PCB footprint for the DDTC123JLP-7 is a standard SOT23-5 package with a 1.7mm x 1.3mm body size. A minimum pad size of 0.8mm x 0.8mm is recommended for reliable soldering.
To ensure reliable operation in high-temperature environments, it is recommended to derate the device's power dissipation according to the thermal derating curve provided in the datasheet. Additionally, ensure good thermal conduction between the device and the PCB, and consider using a heat sink if necessary.
The maximum allowed voltage on the EN pin of the DDTC123JLP-7 is 6V. Exceeding this voltage may damage the device.
Yes, the DDTC123JLP-7 can be used in a switching regulator application. However, ensure that the device is properly bypassed and decoupled to minimize noise and voltage spikes. Additionally, consider the device's power dissipation and thermal characteristics when designing the regulator.
To troubleshoot issues with the DDTC123JLP-7, first verify that the device is properly powered and that the input voltage is within the recommended range. Check for any signs of overheating, and ensure that the device is properly soldered and connected to the PCB. If issues persist, consult the datasheet and application notes for guidance, or contact Diodes Incorporated's technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DDTC123JLP-7 Overview
Use the download button to access the DDTC123JLP-7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DDTC1,
or try a keyword search, such as Small Signal Bipolar Transistors
