A good PCB layout for the DF08M involves keeping the input and output traces separate, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a shielded cable for the input and output connections to reduce EMI.
To ensure proper biasing, make sure to connect the enable pin (EN) to a logic high (VCC) and the shutdown pin (SHDN) to a logic low (GND). Also, ensure that the input voltage (VIN) is within the recommended range of 2.7V to 5.5V.
The DF08M can provide a maximum output current of 1A. However, it's recommended to limit the output current to 0.8A for optimal performance and to prevent overheating.
The output voltage of the DF08M can be calculated using the following formula: VOUT = (R1 / R2) * (VIN - VREF), where R1 and R2 are the resistors connected to the FB pin, VIN is the input voltage, and VREF is the internal reference voltage (1.25V).
The soft-start pin (SS) is used to control the output voltage ramp-up time during startup. By connecting a capacitor to the SS pin, you can slow down the output voltage ramp-up time to prevent inrush currents and reduce the stress on the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DF08M Overview
Use the download button to access the DF08M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Bridge Rectifier Diodes
