Cincon recommends a 4-layer PCB with a dedicated ground plane and thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended for the power traces. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a thermal interface material.
Cincon provides a configuration guide and a software development kit (SDK) that includes example code and a user manual. Engineers should consult these resources to ensure proper configuration and programming of the device for their specific application.
Cincon recommends using X7R or X5R ceramic capacitors with a voltage rating of 10V or higher for the input and output capacitors. The recommended capacitance values are 10uF to 22uF for the input capacitor and 10uF to 47uF for the output capacitor.
Cincon provides a troubleshooting guide that outlines common issues and their solutions. Engineers can also consult the device's status pins and fault flags to diagnose issues. Additionally, Cincon's technical support team is available to assist with troubleshooting and debugging.
Cincon recommends a soldering profile with a peak temperature of 240°C to 250°C and a dwell time of 30 seconds to 60 seconds. The device should be soldered using a reflow oven or a wave soldering machine with a nitrogen atmosphere.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DLD-C100 Overview
Use the download button to access the DLD-C100 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DLD-C,
or try a keyword search, such as Power Supply Modules
