The recommended PCB footprint for the DMN2004TK-7 is a standard SOT23 package with a 1.3mm x 1.3mm body size. A minimum pad size of 0.6mm x 0.6mm is recommended for reliable soldering.
To ensure proper biasing, connect the gate pin to a voltage source through a suitable resistor (e.g., 1kΩ) and a capacitor (e.g., 100nF) to ground. This helps to stabilize the gate-source voltage and reduce noise.
The maximum SOA for the DMN2004TK-7 is defined by the maximum drain-source voltage (Vds) of 20V, maximum drain current (Id) of 2A, and maximum power dissipation (Pd) of 1.25W. Operating within these limits ensures reliable device operation.
While the DMN2004TK-7 is suitable for switching applications, its frequency response is limited to around 100kHz due to its internal capacitances and switching times. For higher-frequency applications, consider using a more specialized device.
To protect the DMN2004TK-7 from ESD, handle the device with an anti-static wrist strap or mat, and ensure the PCB has adequate ESD protection circuits, such as TVS diodes or ESD protection arrays.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DMN2004TK-7 Overview
Use the download button to access the DMN2004TK-7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DMN20,
or try a keyword search, such as Small Signal Field-Effect Transistors
Suggested Parts
If you searched for DMN2004TK-7, you might also be interested in these parts:
