The recommended PCB footprint for the DMN2058U-7 is a standard SOT23 package with a 1.5mm x 1.5mm pad size, with a 0.5mm spacing between pads.
To ensure proper biasing, connect the gate to a voltage source through a 1kΩ to 10kΩ resistor, and connect the source to ground through a 100Ω to 1kΩ resistor. The drain should be connected to a load or a voltage source.
The DMN2058U-7 has an operating temperature range of -55°C to 150°C, but it's recommended to operate within -40°C to 125°C for optimal performance and reliability.
The DMN2058U-7 is designed as a switch, but it can also be used as a linear amplifier. However, its performance may vary depending on the specific application and operating conditions.
To protect the DMN2058U-7 from ESD, handle the device with an anti-static wrist strap or mat, and ensure the PCB has proper ESD protection circuits, such as TVS diodes or ESD protection arrays.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DMN2058U-7 Overview
Use the download button to access the DMN2058U-7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DMN20,
or try a keyword search, such as Small Signal Field-Effect Transistors