Diodes Incorporated recommends a PCB layout with a solid ground plane and a thermal relief pattern under the device to ensure optimal thermal performance. A minimum of 2 oz copper thickness is recommended.
To ensure proper soldering, Diodes Incorporated recommends using a soldering iron with a temperature of 260°C to 280°C, and a soldering time of 3 seconds to 5 seconds. The device should be soldered using a no-clean flux.
The DMTH6012LPSWQ-13 has an operating temperature range of -55°C to 150°C, but the maximum junction temperature (TJ) should not exceed 150°C.
Diodes Incorporated recommends handling the device with ESD precautions, such as using an ESD wrist strap or mat, and storing the device in an ESD-protected package. The device has an ESD rating of 2 kV human body model (HBM) and 150 V machine model (MM).
Diodes Incorporated recommends storing the device in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C and 100°C, and the relative humidity should be below 60%.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DMTH6012LPSWQ-13 Overview
Use the download button to access the DMTH6012LPSWQ-13 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DMTH6,
or try a keyword search, such as Power Field-Effect Transistors
