HALOGEN FREE AND ROHS COMPLIANT, MINI3-G3-B, SC-59A, 3 PIN
ECCN Code:
EAR99
Manufacturer:
Panasonic Electronic Components
Collector Current-Max (IC):
0.1 A
Collector-Emitter Voltage-Max:
50 V
Configuration:
SINGLE WITH BUILT-IN RESISTOR
DC Current Gain-Min (hFE):
160
JEDEC-95 Code:
TO-236AA
JESD-30 Code:
R-PDSO-G3
Number of Elements:
1
Number of Terminals:
3
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
NOT SPECIFIED
Polarity/Channel Type:
NPN
Surface Mount:
YES
Terminal Form:
GULL WING
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
NOT SPECIFIED
Transistor Application:
SWITCHING
Transistor Element Material:
SILICON
DRC2114T0L Frequently Asked Questions (FAQs)
Panasonic recommends a 4-layer PCB with a solid ground plane, and a separate power plane for the input and output. The input and output pins should be placed on opposite sides of the board to minimize noise coupling. Additionally, a 10nF capacitor should be placed between the input and output pins to filter out high-frequency noise.
The DRC2114T0L is rated for operation between -40°C to 125°C. To ensure operation within this range, ensure proper heat sinking, avoid overheating during soldering, and use a thermally conductive material for the PCB. Additionally, consider using a thermal interface material between the device and the heat sink.
The maximum recommended voltage for the input and output pins is 6V. Exceeding this voltage may cause damage to the device. It's essential to ensure that the input and output voltage levels are within the specified range to prevent damage and ensure reliable operation.
The DRC2114T0L has built-in ESD protection, but it's still essential to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure that all equipment and tools are properly grounded. Avoid touching the device's pins or exposed internal components.
The DRC2114T0L should be stored in a dry, cool place with a temperature range of 5°C to 30°C and humidity below 60%. Avoid storing the device in direct sunlight or near sources of moisture. Use anti-static packaging and follow proper handling procedures to prevent damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DRC2114T0L Overview
Use the download button to access the DRC2114T0L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DRC21,
or try a keyword search, such as Small Signal Bipolar Transistors
