HALOGEN FREE AND ROHS COMPLIANT, SSMINI3-F3-B, SC-89, 3 PIN
ECCN Code:
EAR99
Manufacturer:
Panasonic Electronic Components
Additional Feature:
BUILT IN BIAS RESISTOR RATIO IS 1
Collector Current-Max (IC):
0.1 A
Collector-Emitter Voltage-Max:
50 V
Configuration:
SINGLE WITH BUILT-IN RESISTOR
DC Current Gain-Min (hFE):
20
JESD-30 Code:
R-PDSO-F3
Number of Elements:
1
Number of Terminals:
3
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
NOT SPECIFIED
Polarity/Channel Type:
NPN
Surface Mount:
YES
Terminal Form:
FLAT
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
NOT SPECIFIED
Transistor Application:
SWITCHING
Transistor Element Material:
SILICON
DRC9143E0L Frequently Asked Questions (FAQs)
A good PCB layout for the DRC9143E0L should consider the following: keep the input and output traces separate, use a solid ground plane, and minimize the length of the input and output traces. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure reliability in high-temperature applications, it's essential to follow proper derating guidelines, ensure good thermal management (e.g., using a heat sink), and consider using a thermally conductive material for the PCB. Additionally, it's recommended to perform thorough thermal testing and simulation to validate the design.
The DRC9143E0L is not hermetically sealed, so it's essential to take precautions when using it in high-humidity environments. Apply a conformal coating to the PCB, use a moisture-resistant PCB material, and ensure good sealing of the device. Additionally, consider using a humidity sensor to monitor the environment and take corrective action if necessary.
Yes, the DRC9143E0L can be used in switching power supply applications. However, it's essential to ensure that the device is properly bypassed and filtered to minimize the impact of switching noise. Additionally, consider using a snubber circuit to reduce voltage spikes and ringing.
To troubleshoot common issues with the DRC9143E0L, start by checking the input voltage, output voltage, and current. Verify that the device is properly soldered and that the PCB layout is correct. Use a thermal camera or thermometer to check for overheating. If issues persist, consult the datasheet and application notes for guidance, or contact Panasonic's technical support.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DRC9143E0L Overview
Use the download button to access the DRC9143E0L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DRC91,
or try a keyword search, such as Small Signal Bipolar Transistors
