HALOGEN FREE AND ROHS COMPLIANT, SSMINI3-F3-B, SC-89, 3 PIN
ECCN Code:
EAR99
Manufacturer:
Panasonic Electronic Components
Additional Feature:
BUILT IN BIAS RESISTOR RATIO IS 0.21
Collector Current-Max (IC):
0.1 A
Collector-Emitter Voltage-Max:
50 V
Configuration:
SINGLE WITH BUILT-IN RESISTOR
DC Current Gain-Min (hFE):
30
JESD-30 Code:
R-PDSO-F3
Number of Elements:
1
Number of Terminals:
3
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
NOT SPECIFIED
Polarity/Channel Type:
NPN
Surface Mount:
YES
Terminal Form:
FLAT
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
NOT SPECIFIED
Transistor Application:
SWITCHING
Transistor Element Material:
SILICON
DRC9144V0L Frequently Asked Questions (FAQs)
A good PCB layout for the DRC9144V0L should consider the following: keep the input and output traces short and separate, use a solid ground plane, and place decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure reliability in high-temperature applications, follow these guidelines: use a heat sink with a thermal resistance of 10°C/W or less, keep the junction temperature below 125°C, and avoid thermal shocks. Also, consider using a thermally conductive adhesive or thermal tape to improve heat dissipation.
Although the datasheet specifies a maximum input voltage of 5.5V, it's recommended to limit the input voltage to 5V to ensure reliable operation and prevent damage to the device.
Yes, the DRC9144V0L can be used in switching regulator applications. However, it's essential to ensure that the device is properly bypassed with capacitors and that the switching frequency is within the recommended range (typically 100 kHz to 1 MHz).
To troubleshoot issues with the DRC9144V0L, follow these steps: check the PCB layout and ensure it meets the recommended guidelines, verify the input voltage and current, check for decoupling capacitor values and placement, and use an oscilloscope to analyze the output voltage and current waveforms.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DRC9144V0L Overview
Use the download button to access the DRC9144V0L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DRC91,
or try a keyword search, such as Small Signal Bipolar Transistors
