Littelfuse recommends a PCB layout with a large copper area connected to the thermal tab of the device to dissipate heat efficiently. A minimum of 1 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
To ensure reliable soldering, Littelfuse recommends using a soldering iron with a temperature of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C. The device should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for any signs of cold soldering or overheating.
The DRS-DTH-50-80 has a maximum surge current rating of 100 A for 10 ms, and 50 A for 100 ms. However, it's recommended to derate the surge current based on the operating temperature and other environmental factors.
The DRS-DTH-50-80 is designed for low-frequency applications up to 400 Hz. While it may be possible to use the device in high-frequency applications, Littelfuse recommends consulting with their application engineers to ensure the device meets the specific requirements and to discuss any potential derating or modifications.
Littelfuse recommends storing the device in a dry, cool place away from direct sunlight and moisture. The device should be handled with care to avoid mechanical stress, and electrostatic discharge (ESD) precautions should be taken to prevent damage to the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DRS-DTH-50-80 Overview
Use the download button to access the DRS-DTH-50-80 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DRS-D,
or try a keyword search, such as Reed Switches
