Please enter a minimum 3 letters or numbers
Technical Content
Part Image

DRV5032FCDBZR - Texas Instruments

Description: Ultra-Low Power 1.65V to 5.5V Hall Effect Switch Sensor

Download DRV5032FCDBZR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
DRV5032FCDBZR - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
DRV5032FCDBZR - Texas Instruments PCB footprint - SOT23 (3-Pin) - SOT23 (3-Pin) - DBZ0003A height 1.12
click to zoom
3D Models
DRV5032FCDBZR - Texas Instruments - 3D model - SOT23 (3-Pin) - DBZ0003A height 1.12
click to zoom

DRV5032FCDBZR Details

  • Manufacturer Part Number:

    DRV5032FCDBZR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Mainland China, Malaysia, Philippines, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Body Breadth:

    1.3 mm

  • Body Height:

    1.12 mm

  • Body Length or Diameter:

    2.92 mm

  • Housing:

    PLASTIC

  • Hysteresis:

    1.5 mT

  • Input Mode:

    UNIPOLAR

  • JESD-609 Code:

    e3

  • Magnetic Field Range-Max:

    3.9 mT

  • Magnetic Field Range-Min:

    0.5 mT

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Terminals:

    3

  • Operating Current-Max:

    0.0035 mA

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    OPEN-DRAIN

  • Output Current-Max:

    5 mA

  • Output Polarity:

    COMPLEMENTARY

  • Output Range:

    -5.0-5.0mA

  • Output Type:

    DIGITAL CURRENT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Shape/Style:

    RECTANGULAR

  • Sensors/Transducers Type:

    MAGNETIC FIELD SENSOR,HALL EFFECT

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.65 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Matte Tin (Sn)

  • Termination Type:

    SOLDER

DRV5032FCDBZR Frequently Asked Questions (FAQs)

  • A good PCB layout for the DRV5032FCDBZR involves keeping the device as close as possible to the magnet, using a solid ground plane, and minimizing the distance between the device and the decoupling capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The sensitivity of the DRV5032FCDBZR can be set by adjusting the resistor values of the external resistive divider network connected to the SENS pin. A higher resistance value will increase the sensitivity, while a lower resistance value will decrease the sensitivity.
  • The DRV5032FCDBZR can operate up to 100 kHz, but the maximum operating frequency depends on the specific application and the strength of the magnetic field. It's recommended to consult the datasheet and application notes for more information.
  • The output signal of the DRV5032FCDBZR is an open-drain output, which requires an external pull-up resistor to a voltage source. The output signal can be connected to a microcontroller or other logic circuits, but it's recommended to use a buffer or a voltage translator if the output signal needs to be driven over a long distance or to a high-impedance load.
  • The recommended power-on sequence for the DRV5032FCDBZR is to first apply the power supply voltage (VCC) and then apply the input signal to the VIN pin. This ensures that the internal voltage regulator is fully powered up before the input signal is applied.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DRV5032FCDBZR Overview

Use the download button to access the DRV5032FCDBZR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DRV50, or try a keyword search, such as Magnetic Field Sensors

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to DRV5032FCDBZR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

DRV5032FCDBZR Alternates

Showing results

Image Part Number Model
Part Image DRV5032FCDBZT Texas Instruments

Hall Effect Sensor, 0.5mT Min, 3.9mT Max, -5.0-5.0mA, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount