Please enter a minimum 3 letters or numbers
Technical Content
Part Image

DS1233DZ-10+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - DS1233DZ-10+ - MPU Supervisor, 1.2V-5.5V supply, Active-Low, Open-Drain, 350 ms delay/4.375V threshold, SOT-223-4

Download DS1233DZ-10+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
DS1233DZ-10+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
DS1233DZ-10+ - Analog Devices PCB footprint - SOT223 (3-Pin) - SOT223 (3-Pin) - K3+1
click to zoom
3D Models
DS1233DZ-10+ - Analog Devices - 3D model - SOT223 (3-Pin) - K3+1
click to zoom

DS1233DZ-10+ Details

  • Manufacturer Part Number:

    DS1233DZ-10+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    3-SOT_223-N/A

  • Package Description:

    ROHS COMPLIANT, SOT-223, 4 PIN

  • Pin Count:

    3

  • Manufacturer Package Code:

    3-SOT_223-N/A

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-11-18

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    BAT BUP SW:N;MNL RST:Y;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:N;WWD:N

  • Adjustable Threshold:

    NO

  • Analog IC - Other Type:

    VOLTAGE SUPERVISOR/RESET IC

  • JESD-30 Code:

    R-PDSO-G4

  • JESD-609 Code:

    e3

  • Length:

    6.5 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOT-223

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.8 mm

  • Supply Current-Max (Isup):

    0.05 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.2 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    2.3 mm

  • Terminal Position:

    DUAL

  • Threshold Voltage-Nom:

    +4.38V

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.5 mm

DS1233DZ-10+ Frequently Asked Questions (FAQs)

  • The recommended layout and placement for the DS1233DZ-10+ involves keeping the device away from high-frequency noise sources, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended. Additionally, the device should be placed near the battery or power source to minimize voltage drops.
  • To ensure accurate temperature measurement with the DS1233DZ-10+, it is essential to follow proper thermal design practices. This includes ensuring good thermal contact between the device and the PCB, using thermal vias to dissipate heat, and keeping the device away from heat sources. Additionally, calibration and compensation techniques can be used to improve accuracy.
  • The maximum allowed voltage on the VCC pin of the DS1233DZ-10+ is 5.5V. Exceeding this voltage can cause permanent damage to the device. It is recommended to use a voltage regulator or a voltage limiter to ensure that the voltage on the VCC pin does not exceed the maximum rating.
  • The DS1233DZ-10+ can be interfaced with a microcontroller using a 3-wire serial interface (SCLK, SDATA, and RST). The microcontroller can send commands to the DS1233DZ-10+ to read temperature data, configure the device, and perform other functions. The DS1233DZ-10+ can also be used in a standalone mode without a microcontroller.
  • The typical current consumption of the DS1233DZ-10+ is around 1.5mA when operating in normal mode. However, the current consumption can vary depending on the operating mode, temperature range, and other factors. It is recommended to consult the datasheet and application notes for more information on power consumption.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DS1233DZ-10+ Overview

Use the download button to access the DS1233DZ-10+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS123, or try a keyword search, such as Power Management Circuits

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DS1233DZ-10+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

DS1233DZ-10+ Alternates

Showing results

Image Part Number Model
Part Image DS1233DZ-10 Dallas Semiconductor

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.38V, CMOS, PDSO4
Part Image DS1233DZ-10/T&R Maxim Integrated Products

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.38V, CMOS, PDSO4