ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Ensure the input voltage is within the recommended range (4.5V to 5.5V), and the output voltage is set to the desired level using an external resistor divider network. Also, ensure the device is properly decoupled with ceramic capacitors.
The maximum allowable power dissipation for the DTA114ECAHZGT116 is 1.5W. Exceeding this limit can lead to device failure or reduced lifespan.
The DTA114ECAHZGT116 is rated for operation up to 125°C. However, the device's performance and lifespan may be affected at high temperatures. Consult ROHM's application notes for guidance on high-temperature operation.
Handle the device with ESD-protective equipment, such as wrist straps and mats. Ensure the device is stored in an ESD-protective package, and avoid touching the pins or leads during handling.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA114ECAHZGT116 Overview
Use the download button to access the DTA114ECAHZGT116 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA11,
or try a keyword search, such as Small Signal Bipolar Transistors
