ROHM recommends a thermal pad size of 2.5mm x 2.5mm with a thermal via diameter of 0.5mm, and a minimum of 5 thermal vias. Additionally, a solid copper plane on the bottom layer can help improve thermal dissipation.
The DTA124ECAHZGT116 requires a bias voltage of 2.5V to 5.5V. Ensure the input voltage is within this range, and the output voltage is properly decoupled with a 10uF capacitor. Also, maintain a stable input voltage to prevent oscillations.
The DTA124ECAHZGT116 has an operating temperature range of -40°C to 125°C. However, it's recommended to operate the device within a temperature range of -20°C to 85°C for optimal performance and reliability.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to prevent damage from electrostatic discharge. Additionally, follow proper handling and storage procedures to minimize ESD risks.
ROHM recommends a soldering temperature of 260°C (max) and a soldering time of 10 seconds (max) to prevent damage to the device. Use a soldering iron with a temperature control and follow the recommended soldering profile.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA124ECAHZGT116 Overview
Use the download button to access the DTA124ECAHZGT116 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA12,
or try a keyword search, such as Small Signal Bipolar Transistors
