ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure stable operation, ROHM recommends using a low-ESR capacitor (e.g., ceramic or film capacitor) with a capacitance value of 1uF or more, placed close to the DTA124EUBTL. Additionally, a 10nF to 100nF capacitor can be added in parallel to filter high-frequency noise.
The maximum allowed voltage on the input pins is 6V, which is the absolute maximum rating. However, for reliable operation, ROHM recommends keeping the input voltage below 5.5V.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the DTA124EUBTL from electrostatic discharge. Additionally, a latch-up protection circuit can be implemented using resistors and diodes to prevent latch-up conditions.
The recommended operating temperature range for the DTA124EUBTL is -40°C to 125°C. However, the device can operate up to 150°C with derated specifications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DTA124EUBTL Overview
Use the download button to access the DTA124EUBTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA12,
or try a keyword search, such as Small Signal Bipolar Transistors
