ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Ensure that the device is operated within the recommended temperature range (up to 150°C). Use a heat sink or thermal interface material to reduce thermal resistance. Also, consider derating the current and voltage ratings at high temperatures.
The maximum allowable voltage for the DTC614TUT106 is 120% of the rated voltage (600V) for a short duration (less than 1 second). However, it's recommended to operate the device within the rated voltage to ensure reliability.
Handle the device with an ESD wrist strap or mat, and ensure that the PCB is designed with ESD protection in mind, such as using ESD diodes or resistors. Also, store the device in an ESD-safe package.
ROHM recommends a soldering temperature of 260°C (max) and a soldering time of 10 seconds (max) to prevent damage to the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC614TUT106 Overview
Use the download button to access the DTC614TUT106 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC61,
or try a keyword search, such as Small Signal Bipolar Transistors
