A 2-layer or 4-layer PCB with a large copper area for heat dissipation is recommended. The IC should be placed near a thermal pad or a heat sink to ensure efficient heat dissipation.
The EN pin should be pulled high to turn on the IC, and pulled low to turn it off. A soft-start circuit can be used to prevent inrush current during power-on.
The maximum allowable voltage on the VIN pin is 30V, but it's recommended to keep it below 25V for optimal performance and reliability.
The output current can be adjusted by changing the value of the sense resistor (RSENSE) connected to the SENSE pin. A smaller sense resistor value increases the output current, while a larger value decreases it.
The COMP pin is used for loop compensation to ensure stability of the output voltage. A capacitor (typically 10nF to 100nF) should be connected between the COMP pin and GND to provide compensation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
EAHC2835WD6 Overview
Use the download button to access the EAHC2835WD6 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like EAHC2,
or try a keyword search, such as Visible LEDs
