The recommended land pattern for ECA2EM2R2 is a rectangular pad with a size of 2.5mm x 1.25mm, with a 0.5mm radius corner and a 0.3mm solder mask clearance.
To minimize high-frequency noise, use a low-ESR capacitor, such as a ceramic capacitor, in parallel with the ECA2EM2R2. Additionally, ensure good PCB layout practices, including short traces, and use a ground plane to reduce electromagnetic interference (EMI).
The maximum operating temperature range for ECA2EM2R2 is -40°C to +125°C, but it's recommended to operate within -20°C to +85°C for optimal performance and reliability.
Yes, the ECA2EM2R2 is designed to withstand vibrations up to 10G (10Hz to 2kHz) and 6G (2kHz to 10kHz) according to IEC 60068-2-6. However, it's recommended to perform additional testing and validation for specific vibration requirements.
To ensure reliability in a humid environment, follow proper storage and handling procedures, and consider using a moisture-resistant coating or conformal coating on the PCB. Additionally, ensure the ECA2EM2R2 is properly soldered and sealed to prevent moisture ingress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ECA2EM2R2 Overview
Use the download button to access the ECA2EM2R2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ECA2E,
or try a keyword search, such as Ceramic Capacitors
