The recommended land pattern for EEETP1E101AP is a rectangular pad with a size of 2.5mm x 1.5mm, with a 0.5mm radius corner and a 0.3mm solder mask clearance.
To handle thermal derating, ensure that the operating temperature is within the specified range (−40°C to +105°C). For temperatures above 70°C, derate the capacitance by 1.5% per 10°C increase. Also, consider using a heat sink or thermal interface material to reduce thermal resistance.
The ESR of EEETP1E101AP is not explicitly stated in the datasheet, but it can be estimated to be around 0.05Ω to 0.1Ω based on similar capacitors from Panasonic. However, it's recommended to consult with Panasonic's application engineers or perform your own measurements for accurate ESR values.
Yes, EEETP1E101AP is designed to withstand vibrations up to 10Hz to 200Hz, 1.5mm double amplitude, as per IEC 60068-2-6. However, it's essential to ensure proper mounting and soldering to prevent mechanical stress and damage.
Store EEETP1E101AP in a dry, cool place (≤30°C, ≤60% RH) in its original packaging or a sealed bag with desiccant. Avoid exposing the capacitors to high humidity or temperature fluctuations. If the capacitors are exposed to moisture, bake them at 125°C for 24 hours to remove any absorbed moisture.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEETP1E101AP Overview
Use the download button to access the EEETP1E101AP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEETP,
or try a keyword search, such as Ceramic Capacitors
