The recommended land pattern for EEUFC1J391S can be found in Panasonic's recommended footprint document or by consulting with a PCB design expert. A general guideline is to use a land pattern with a pad size of 2.5mm x 1.5mm and a spacing of 1.5mm between pads.
To handle the high ESR of EEUFC1J391S, consider using a low-ESR capacitor in parallel, adding a series resistor to reduce the AC current, or using a capacitor with a lower ESR value. Additionally, ensure that the PCB layout is optimized for low impedance and minimal parasitic inductance.
The derating curve for EEUFC1J391S can be obtained by contacting Panasonic's technical support or by consulting the Panasonic Capacitor Selection Guide. As a general guideline, the capacitance value decreases by approximately 20% for every 10°C increase above the rated temperature.
EEUFC1J391S is a radial lead type capacitor, which can be susceptible to vibration. To ensure reliability, consider using a capacitor with a more robust design, such as a chip capacitor or a capacitor with a specialized vibration-resistant design. Additionally, ensure that the PCB is properly secured and the capacitor is adequately supported.
The recommended soldering profile for EEUFC1J391S is a standard reflow profile with a peak temperature of 260°C and a dwell time of 30-60 seconds. However, it's recommended to consult Panasonic's soldering guidelines or the PCB manufacturer's recommendations for specific soldering profiles.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEUFC1J391S Overview
Use the download button to access the EEUFC1J391S schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEUFC,
or try a keyword search, such as Ceramic Capacitors
