Panasonic recommends a PCB layout with a large copper area for the capacitor pads, and a via connection to the internal GND plane to reduce ESR. Additionally, a 10mil gap between the capacitor and other components is recommended to prevent electrical noise coupling.
The EEUFC2A120 is designed to handle high-frequency ripple current up to 100 kHz. However, it's essential to consider the capacitor's impedance characteristics and ensure that the ripple current does not exceed the rated RMS current to prevent overheating and reduce lifespan.
Panasonic provides a derating curve in the datasheet, which shows that the capacitor's capacitance and ESR increase with temperature. For example, at 105°C, the capacitance is derated to 80% of its nominal value, and the ESR increases by 20%.
Yes, the EEUFC2A120 is designed to withstand vibrations up to 10G (10-2000 Hz) and shocks up to 100G (11 ms). However, it's essential to ensure that the capacitor is properly mounted and secured to the PCB to prevent mechanical stress and damage.
Panasonic recommends a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a cooling rate of 2-4°C/s. It's essential to follow the recommended profile to prevent damage to the capacitor's internal components.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEUFC2A120 Overview
Use the download button to access the EEUFC2A120 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEUFC,
or try a keyword search, such as Ceramic Capacitors
Suggested Parts
If you searched for EEUFC2A120, you might also be interested in these parts:
