Panasonic recommends a PCB layout with a large copper area for the capacitor pads to reduce ESR. A minimum of 2 oz copper thickness is recommended. Additionally, the capacitor should be placed close to the power source and the PCB should have a solid ground plane to reduce inductance.
Yes, EEUFM1V680 is suitable for high-frequency applications up to 100 kHz. However, the impedance of the capacitor increases with frequency, so the effective capacitance may be lower than the rated value at high frequencies.
The capacitance of EEUFM1V680 decreases with increasing temperature. The temperature coefficient of capacitance is -55 ppm/°C, which means that the capacitance will decrease by 0.055% for every 1°C increase in temperature.
Yes, EEUFM1V680 is AEC-Q200 qualified, which means it meets the stringent requirements for automotive applications. However, it's essential to verify the capacitor's performance under the specific operating conditions of the application.
Yes, EEUFM1V680 can be used in series or parallel configurations to achieve higher voltage ratings or increase the overall capacitance. However, it's crucial to ensure that the capacitors are properly matched and the configuration is designed to minimize the risk of overvoltage or overcurrent.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEUFM1V680 Overview
Use the download button to access the EEUFM1V680 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEUFM,
or try a keyword search, such as Ceramic Capacitors
