Panasonic recommends a PCB layout with a large copper area under the capacitor to reduce ESR. A 2-layer PCB with a solid ground plane on the bottom layer and a wide trace connecting the capacitor pads to the ground plane is recommended.
The EEUFS2A121 is designed to operate up to 100 kHz, but its impedance may increase at higher frequencies due to the ESL (Equivalent Series Inductance). To minimize the impact of ESL, Panasonic recommends using a capacitor with a shorter lead length and a smaller case size.
Panasonic provides a derating curve in the datasheet, which shows that the capacitor's capacitance and voltage rating decrease as the temperature increases. For example, at 105°C, the capacitance is derated to 80% of its nominal value, and the voltage rating is derated to 70% of its nominal value.
Yes, the EEUFS2A121 is designed to withstand vibrations up to 10G (10 Hz to 2000 Hz) and can be used in high-vibration environments. However, it's recommended to follow Panasonic's guidelines for mounting and soldering to ensure reliable operation.
Panasonic recommends a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a cooling rate of 2-4°C/second. It's also recommended to use a solder with a melting point above 217°C to ensure reliable solder joints.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEUFS2A121 Overview
Use the download button to access the EEUFS2A121 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEUFS,
or try a keyword search, such as Ceramic Capacitors
