Description:The EL5166 and EL5167 amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1. 4GHz at AV = +1 and 800MHz at AV = +2. This makes these amplifiers ideal for today's High-Speed video and monitor applications, as well as a number of RF and IF frequency designs. With a supply current of just 8. 5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption. The EL5166 also incorporates an enable and
Renesas provides a recommended PCB layout in the application note 'EL5166IWZ-T7 Evaluation Board User's Manual' (document number R01AN4393EU0100). It includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The EL5166IWZ-T7 is rated for operation from -40°C to 125°C. To ensure operation within this range, ensure proper thermal management, such as providing adequate heat sinking, using thermal interface materials, and avoiding thermal hotspots on the PCB. Additionally, follow the recommended operating conditions and derating guidelines in the datasheet.
The recommended input capacitor value is 10uF to 22uF, with a voltage rating of 25V or higher. A low-ESR ceramic capacitor, such as an X5R or X7R type, is recommended to minimize noise and ensure stable operation.
To troubleshoot oscillations or instability issues, check the PCB layout for noise coupling, ensure proper decoupling of the input and output, and verify that the recommended operating conditions are met. Additionally, check for component tolerances, especially the input capacitor value and ESR, and ensure that the output is properly terminated. If issues persist, consult the application note 'EL5166IWZ-T7 Troubleshooting Guide' (document number R01AN4394EU0100) for further guidance.
The recommended output capacitor value is 10uF to 22uF, with a voltage rating of 25V or higher. A low-ESR ceramic capacitor, such as an X5R or X7R type, is recommended to minimize noise and ensure stable operation. The output capacitor should be placed close to the output pin to minimize inductance and ensure proper filtering.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EL5166IWZ-T7 Overview
Use the download button to access the EL5166IWZ-T7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EL516,
or try a keyword search, such as Operational Amplifiers
