Description:Support is limited to customers who have already adopted these products.The EL5170 and EL5370 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications such as driving twisted-pair lines in component video applications. The inputs signal can be in either single-ended or differential form but the outputs are always in differential form. The output common mode level for each channel is set by the associated VREF pin, which have a -3dB bandwidth of ove
A good PCB layout for the EL5170ISZ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
The EL5170ISZ requires a single 5V power supply, and it's recommended to use a low-dropout linear regulator or a switching regulator with a low noise output. The power sequencing requirement is to power up the VCC pin before the VLOGIC pin, and to ensure that the VCC pin is stable before applying a logic signal to the VLOGIC pin.
The EL5170ISZ can drive a maximum capacitive load of 100pF, and exceeding this limit can affect the device's performance, causing increased settling time, oscillations, or even device damage. It's recommended to use a buffer or an amplifier to drive heavy capacitive loads.
To troubleshoot common issues with the EL5170ISZ, start by checking the PCB layout and ensuring that the device is properly powered. Check for noise on the power supply lines, and ensure that the input and output signals are within the recommended operating range. Use an oscilloscope to check for oscillations or instability, and consult the datasheet for specific troubleshooting guidelines.
The EL5170ISZ has a maximum junction temperature of 150°C, and it's recommended to keep the device temperature below 125°C for reliable operation. Ensure good thermal conductivity between the device and the PCB, and use thermal vias or a heat sink if necessary. Consult the datasheet for thermal resistance and power dissipation guidelines.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EL5170ISZ Overview
Use the download button to access the EL5170ISZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EL517,
or try a keyword search, such as Line Driver or Receivers
